Solo X 15″ Dual 2 Ohm 2000 Watt RMS Subwoofer Combo with Warhorse 3600 Amplifier

Description

• Built for Competition: Both the subwoofer and amplifier are engineered for high-performance, ensuring clear, distortion-free bass even at maximum output.
• Perfect for Custom Installations: Easy to integrate into your system with full compatibility and included accessories, including remote bass control and diagnostics tools.
• Designed for Durability: Premium components in both the subwoofer and amplifier ensure long-lasting reliability under heavy use.
• Custom Tuned Bass: The recommended enclosure volume and port length are optimized for maximum bass output and performance.

Solo X 15″ Dual 2 Ohm 2000 Watt RMS Subwoofer Combo with Warhorse 3600 Amplifier

This Listing Includes:

• (1) Kicker 15 Inch Dual 2-Ohm Subwoofer
• (1) Kicker Warhorse 3600.1 Amplifier

Experience earth-shattering bass with our Kicker WARHORSE WXA Series 3600W Monoblock Amplifier paired with a single Kicker 15-Inch L7X Dual 2-Ohm Competition Subwoofer. This powerful combo delivers deep, resonant lows and competition-level sound performance.

Wiring the dual 2-ohm coils in parallel (both positives together, both negatives together) gives you a 1-ohm load.

Wiring Configuration:

• Dual 2-Ohm coils wired in parallel for a 1-ohm load
• Amp Output: 3600W RMS @ 1 ohm
• Careful gain setting recommended to avoid overpowering the subwoofer

Subwoofer Specifications:

• Woofer Size: 15 in (38 cm)
• Recommended Amplifier Power: 1000-2000 Watts RMS
• Frequency Response: 20 – 100 Hz
• Magnet Diameter: 8.69 in (22 cm)
• Total Magnet Weight: 406 oz (11.5 kg)
• Voice Coil Diameter: 3″ (75 mm)
• Voice Coil Winding Width: 2.5″ (62.5 mm)
• Top Plate Thickness: 0.5″ (12 mm)
• Rated Impedance: 2 Ohm
• Xmax (Linear Excursion): 1.25″ (31.25 mm)
• Mounting Cutout: 13.75 in (34.9 cm)
• Mounting Depth: 11.56 in (29.3 cm)

Enclosure Recommendations

• Recommended Vented Box Volume: 5 cubic feet (141.6 L)
• Port Opening (in x in / cm x cm): 4.25 x 16.5 in (11 x 42 cm)
• Port Length (in / cm): 34.75 in (88 cm)
• Tuning Frequency: 30 Hz
• Woofer Displacement: 0.21 cubic feet (5.94 L)

Amplifier Specifications:

• RMS Power (watts/ch) 1 Ohm Mono (@ 14.4v, <1%THD): 3600×1
• RMS Power (watts/ch) 2 Ohm Mono (@ 14.4v, <1%THD): 2500×1
• RMS Power (watts/ch) 4 Ohm Mono (@ 14.4v, <0.5%THD): 1400×1
• Dynamic Power (watts): 5000
• Frequency Response (Hz): 10-200
• Signal-to-Noise Ratio (dB; A-weighted, re: rated power): >90
• Signal-to-Noise Ratio (dB; ref: 1W output): >70
• Input Sensitivity: low level 125mV-5V | high level 1V-40V
• Selectable Electronic Crossover: Variable Low-pass 50-200Hz, 24dB/octave
• Subsonic Filter: Defeatable @ 15Hz, 24dB/octave

Amplifier Features:

• Features extreme reliability under intense bass power and overall use
• Full-bridge Class-D design
• Quad micro-controller-regulated cooling fans
• Capable of daisy-chaining remote power across multiple amps
• Competition mode switch to avoid potentiometer creep, fix crossover setting, and gain-match multiple amps
• Includes premium remote bass-level control with a magnetic mount
• Includes a heavy-duty, magnetic-mount diagnostic tool for monitoring voltage measurements and amp protection status
• Fully compatible with most factory or aftermarket source units (with FIT+ differential inputs)
• Engineered completely in-house by KICKER R&D